Roller Conveyor RM8320

The DC roller conveyor curves change the direction of transport of conveying goods. The tapered rollers retain the alignment of the conveying goods between the side frames. A control system enables zero pressure accumulation transport. Each zone is driven by a DC RollerDrive that is connected to a fixed number of idlers via round belts.

General Technical Data

Max. load capacity*	50 kg/zone, 25kg/zone for deep freeze and chillenvironments
Conveyor speed*	0.1 to 1.0 m/s (at 35 kg) 0.1 to 0.8 m/s (at 50 kg) 0.6 m/s for deep freeze and chill environments
Incline/decline	Not suitable
Ambient temperature	Normal range 0 to +40 °C, chill from 0 to +5 °C (only 24 V), and deep freeze from –30 to 0 °C (only 24 V)

* The combination of maximum values is not always possible.

Drive

Rated voltage	24/48 V
Motor type	Interroll RollerDrive EC5000
Drive medium	Round belt
Torque transmission	Roller-to-Roller
Control	MultiControl

Roller

Roller type	Interroll Series 1700KXO
Roller diameter	50 mm
Roller material	Steel 1.5 mm, with gray tapered polypropylene elements
Number of rollers	6 for 30°, 9 for 45°, 12 for 60°, 18 for 90°

BF	Rated width	420, 620, 840 mm (others on request)
LW	Lane width	BF (+120/–90 mm per side with flexible side guide)
a	Angle	30°/45°/60°/90°
ML	Module length	ZL x number of zones, max. 4320 mm
TW	Module width	BF + 80 mm
Pi	Roller pitch, inside	~72 mm
P	Roller pitch, outside	~(0.087 x LW) + Pi mm
HSG	Side guide height	35 – 65 mm

	RM8320_EN.pdf
	(pdf. 514 KB)

Downloads