Conveyor Rollers

Interroll Products

Gravity Conveyor Roller Series 1100

Low friction roller for gravity or non-driven application. Low inertia due to low rolling resistance of roller. Excellent start up properties. Integral labyrinth seal for protection of bearing balls. Stainless steel or PVC tube. Ball bearing with stainless steel balls. Swaged tube ends for easy 90° box transfer. Form fit of bearing housings in PVC tubes prevents them from walking out.

View details

Steel Conveyor Roller Series 1200

Full steel heavy duty roller design. Roller for driven and non-driven application. Roller for low (-28°C) and high (+80°C) temperatures. Swaged tube ends for easy 90° box transfer.

View details

Heavy-duty Conveyor Roller Series 1450

Universal conveyor roller for heavy loads, such as driven or non-driven pallet handling. Low noise operation due to precision bearing, polymer housing and shield. Integrated labyrinth seal for best bearing protection against dirt, water and dust. Heavy duty housing design to carry excessive axial loads. Swaged tube ends for easy 90° box transfer. Flanges can be attached to roller to guide pallets or boxes.

View details

Slide Bearing Conveyor Roller Series 1500

Totally enclosed roller due to plug-type housings. This prevents water from entering the roller. Roller for gravity and non-driven application specifically wash-down applications. Slide bearing made of a PTFE clip which simply snaps into 11mm hex holes. Stub shafts made of stainless steel. Swaged tube ends for easy 90° box transfer.

View details

Lightweight Conveyor Roller Series 1700 light

Conveyor Roller for driven applications which require small tube diameter and small roller pitch. Typical applications: Packaging and paper industry. Swaged tube ends for easy 90° box transfer. Sealed precision bearing 689 2Z.

View details

Universal Conveyor Roller Series 1700

Wide range of driven and non-driven application. High speed roller conveyor. Low noise operation due to precision bearing, polymer housing and shield. Integrated labyrinth seal for best bearing protection against dirt, water and dust. Swaged tube ends for easy 90° box transfer. No build-up of electro static charge on roller because of integral static dissipative element.

View details

Tapered Universal Conveyor Roller Series 1700KXO

Roller Series 1700 with pressed on Polypropylene taper segments. Taper segments secured against axial movement. Larger end closed by cap. Conveyor roller for driven and non-driven curves. Impact resistant and abrasion-proven taper material.

View details

Fixed Drive Conveyor Roller Series 3500

Series 3500 is based on Series 1700. Housing on non-driven side is identical to Series 1700. Roller for driven applications with a wide application range. Best combination for application with RollerDrive.

Available chain drives include PolyVee, PolyO (round belt with 2 grooves), toothed belt or chain drive ½ Z9 / Z11 / Z14.

View details

Tapered Fixed Drive Conveyor Roller Series 3500KXO light

Conveyor roller for driven and non-driven curves. Integral O-ring grove for drive from roller to roller. Small inner curve radius of 357.5 mm. Space-saving solution for curves. Roller for roller curves which require small roller pitch.

View details

Tapered Fixed Drive Conveyor Roller Series 3500KXO

Roller Series 3500 with pressed on Polypropylene taper segments. Taper segments secured against axial movement. Larger end closed by cap. Roller for driven roller curves. Impact resistant and abrasion-proven taper material.

Available chain drives include PolyVee, PolyO (round belt with 2 grooves) or chain drive Z14 (on the wide side).

View details

Heavy-duty Conveyor Roller Series 3560

Roller for heavy duty chain driven conveyor which require a small roller diameter and pitch. Welded steel sprockets for high torque transmission.

View details

Heavy-duty Conveyor Roller Series 3600

Low noise roller for heavy duty driven applications. Polyamide sprockets and housings. Non driven side of roller is identical to Series 1450. Form fit of drive side housing to tube to ensure secure torque transmission. Flanges can be attached to roller to guide pallets or boxes.

Available chain drives are toothed belt, single sprocket 5/8" Z18/Z15 and double sprocket 5/8" Z18/Z15.

View details

Friction Conveyor Roller Series 3800

Drive sprocket is not fixed to roller, creating a friction clutch on one side of the roller. Torque of the drive is related to the load on roller. Series 3800 is used for applications which allow low to medium accumulation pressure. Series 3800 is based on Series 1700. Housing on non-driven side is identical to Series 1700.

Available chain drives are ½ Z9 / Z11 / Z14.

View details

Double Friction Conveyor Roller Series 3870

Medium duty double friction roller. Inner roller creating two friction clutches on both sides of the roller. Increased tangential force compared to Series 3800.

Available chain drive is ½ Z14 polymer.

View details

Heavy-duty Conveyor Roller Series 3950

Low noise roller for heavy duty driven applications. Polyamide sprockets and housings. Non driven side of roller is identical to Series 1450. Form fit of drive side housing to tube to ensure secure torque transmission. Flanges can be attached to roller to guide pallets or boxes.

Available chain drives are toothed belt, single sprocket 5/8" Z18/Z15 and double sprocket 5/8" Z18/Z15.

View details

Conveyor Accessories

Interroll Products

Pressure Roller

  • Two ball bearings for single side fixation
  • Crowned shape for belt tracking
  • Belt width 20 to 30mm
  • Material: Polyamide
  • Ball bearings in mild steel or stainless steel
  • Max. speed: 2.5 m/s

View details

Ball Transfer Unit

  • Multidirectional travel of goods
  • Easy running balls
  • Ball diameter: 25.4 mm
  • Polyamide housing
  • Different fixing flanges available
  • Max. load: 500 N

View details

Steel Ball Transfer Unit

  • Multidirectional travel of goods
  • Easy running balls
  • Steel ball
  • Ball diameter: 12.7; 25.4; 38.1 and 50.8 mm
  • Zinc plated steel housing
  • Max. load: 20 kN

View details

Polymer Conveyor Wheel 2130

  • Low-noise operation
  • Impact resistant Polypropylene
  • Rubber coating available
  • Gravity applications
  • Roller diameter 48 mm
  • Max. speed: 0.3 m/s
  • Max. load static: 100 N
  • Max. load dynamic: 200 N

View details

Polymer Conveyor Wheel 2370

  • Low-noise operation
  • Impact resistant Polypropylene
  • Stub shaft for single side fixation
  • One side flange for guidance of goods
  • Gravity applications
  • Roller diameter 38 mm
  • Max. speed: 0.3 m/s
  • Max. load static: 50 N
  • Max. load dynamic: 100 N

View details

Steel Conveyor Wheel

  • Wide operation temperature: -28 °C to +80 °C
  • Single row bearing
  • Zinc plated steel
  • Roller diameter 48 mm
  • Max. speed: 0.8 m/s
  • Max. load static: 100 N
  • Max. load dynamic: 200 N

View details

OmniWheel

  • Multidirectional travel of goods
  • Mounting on hex or round shaft
  • Driven and non-driven application
  • Omniwheels can be interlocked for close pitch
  • Corrosion free design: Polyamide and stainless steel
  • Wheel diameter 48 and 80 mm
  • Max. load: 50 N (48 mm); 250 N (80 mm)

View details

Omnimat Module

  • Modular housing for omniwheel
  • Interlocking dove tail profiles for easy omniwheel bed assembly
  • Internal slide baring
  • Gravity applications
  • Max. load per module: 50 N

View details

Roller Track Floway

  • Roller diameter 25 mm
  • Roller pitch 28 mm
  • Steel roller shaft 3 mm
  • Rolles made of Polyethylene
  • Track made of 1 mm zinc plated steel
  • Max. load per roller: 80 N

View details

Roller Track BU40

  • Polymer or steel wheel diameter 48 mm
  • Roller pitch 52 mm
  • Track made of 1 mm zinc plated steel
  • Wheels are snapped in
  • Gravity applications
  • Max. load per roller: 200 N (steel and polymer roller)

View details

Roller Track BU50

  • Rollers based on Series 1700 diameter 50 mm
  • Polymer or steel rollers
  • Polymer rollers also available with flange
  • Track made of 2.5 mm zinc plated steel
  • Hole pitch of track 26 mm
  • Max. load per roller: 400 N (polymer roller)
  • Max. load per roller: 1600 N (steel roller)

View details

PolyVee Belt

  • Significantly improved torque transmission compared to O-rings
  • Better acceleration and deceleration of goods
  • Best fit for RollerDrive
  • Belts for roller pitch: 60; 75; 100; 120; 125
  • 2- and 3-rib belts available
  • Also usable for curves
  • No belt tensioner required due to flexible belt core
  • Standard belt ISO 9981, DIN 7867

View details